Seakeeper 30 HD

The Seakeeper 30HD is built to eliminate up to 95% of boat roll
on vessels up to ~85 tons. Larger vessels can be fitted with multiple
units to achieve optimal results. Unlike traditional external fins, the
Seakeeper 30HD requires only modest electrical power and has
no external appendages—meaning no drag or risk of snags.

$210,000 (not including installation) Buy Now
Seakeeper 30 HD

Ideal for Boats

~ 45' - 54'

~ 55' - 64'

~ 65' - 74'

~ 75' +

Seakeeper 30 HD shown to scale here on a 35M Survey Boat.

Proceed with Confidence

Durability

Designed for longer, rougher use. Seakeeper HD will keep you stable and safe, no matter how long the job

Eliminate Boat Roll

Eliminate up to 95% of boat roll and the danger, fatigue, anxiety, and seasickness that go with it

Flexible & Efficient

Unlike traditional fins, Seakeeper is completely internal and can be installed virtually anywhere

Take a Look Under the Hood

Weight 3,920 lbs (1,778 kg)
Dimensions 54.3 L x 55.9 W x 43.5 H (inches)
1.38 L x 1.42 W x 1.11 H (meters)
View full spec sheet Seakeeper 30 HD

Innovative Cooling System

Our patented cooling system allows the flywheel to spin at an extremely high rate of speed, providing ultimate performance in the smallest and lightest package possible.

Vacuum Sealed

Seakeeper’s vacuum encapsulation enables the flywheel to spin roughly three times faster, cuts flywheel weight by two-thirds and halves power requirements. Moreover, because the critical components (flywheel, bearings, and motor) are sealed for life in a vacuum, they are forever isolated from the marine environment.

Active Control

Seakepeeper’s active control optimizes gyro torque, providing an unsurpassed level of performance. Unlike a passively controlled gyro, which must be turned off in the roughest conditions and/or at higher speeds, the Seakeeper is effective at all speeds and can be used in all sea conditions.

Seakeeper 30 HD

Specifications

Rated Speed 4,400 RPM
Angular Momentum at Rated RPM 30,000 N-M-S
Anti-Rolling Torque at Rated RPM 62,571 N-M
Spool-up Time to Rated RPM 75 minutes (4,400 RPM)
Spool-up Time to Stabilization 50 minutes (3,500 RPM)
Spool-up Power
AC Motor 3000 Watts Max
DC Control 240 Watts
Operating Power
AC Motor (sea state dependent) 2000 - 3000 Watts
DC Control 240 Watts
AC Input Voltage 208 - 230 VAC (+/- 10%), 50/60 Hz, Single Phase
DC Input Voltage 24 VDC @ 10 Amps
Weight 3,920 lbs (1,778 kg)
Envelope Dimensions 54.3 L x 55.9 W x 43.5 H (inches)
1.38 L x 1.42 W x 1.11 H (meters)
Noise Output 72-74 dBC at 1 meter
Distrbutor IconCreated with Sketch. Installation Center IconCreated with Sketch. Seakeeper IconCreated with Sketch. Service Center IconCreated with Sketch. Service Installation ComboCreated with Sketch. angle-right3Asset 1boat-40-49boat-45-54boat-50-59boat-55-64boat-60-69boat-65-74 boat-70-84Asset 1boat-85+ Calendar IconCombined ShapeFacebookfacebook earthgoogle-plusinstagram linkedin Logo/Logomarkmail IconPhone IconAward IconLogo/SHD WhiteCreated with Sketch. Seakeeper LogomarkSmile IconInstallation IconTwittertwittervimeo youtube
View The
Seakeeper Brochure
Recreational
Commercial (HD)