Seakeeper 16

Crafted for ~60’ - 69’ boats, up to ~50 tons, the
Seakeeper 16 is designed to eliminate up to
95% of boat roll. The Seakeeper 16 is completely
internal, requires only modest electrical power,
and can be installed virtually anywhere on board.

$96,495 (not including installation) Buy Now
Seakeeper 16

Ideal for Boats

~ 30' - 39'

~ 40' - 49'

~ 50' - 59'

~ 60' - 69'

~ 70' - 84'

~ 85' +

Seakeeper 16 shown to scale here on a 65’ Sport Fisher.

Stabilization for Any Occasion

Small & Lightweight

Seakeeper weighs only a small fraction of the boat's displacement

Eliminate Boat Roll

Eliminate up to 95% of boat roll and the danger, fatigue, anxiety, and seasickness that go with it

Flexible & Efficient

Unlike traditional fins, Seakeeper is completely internal and can be installed virtually anywhere

Sea Trials

See for Yourself How Seakeeper
Transforms Your Experience on the Water

See All
Jim Smith 75
Viking 61

Take a Look Under the Hood

Weight 2,195 lbs (996 kg)
Dimensions 42.6 L x 43.2 W x 32.8 H (inches)
1.08 L x 1.10 W x 0.83 H (meters)
View full spec sheet Seakeeper 16

Innovative Cooling System

Our patented cooling system allows the flywheel to spin at an extremely high rate of speed, providing ultimate performance in the smallest and lightest package possible.

Vacuum Sealed

Seakeeper’s vacuum encapsulation enables the flywheel to spin roughly three times faster, cuts flywheel weight by two-thirds and halves power requirements. Moreover, because the critical components (flywheel, bearings, and motor) are sealed for life in a vacuum, they are forever isolated from the marine environment.

Active Control

Seakepeeper’s active control optimizes gyro torque, providing an unsurpassed level of performance. Unlike a passively controlled gyro, which must be turned off in the roughest conditions and/or at higher speeds, the Seakeeper is effective at all speeds and can be used in all sea conditions.

Seakeeper 16

Specifications

Rated Speed 6,130 RPM
Angular Momentum at Rated RPM 16,000 N-M-S
Anti-Rolling Torque at Rated RPM 30,720 N-M
Spool-up Time to Rated RPM 57 minutes (6,130 RPM)
Spool-up Time to Stabilization 45 minutes (5,210 RPM)
Spool-up Power
AC Motor 3000 Watts Max
DC Control 240 Watts
Operating Power
AC Motor (sea state dependent) 2300 - 3000 Watts
DC Control 240 Watts
AC Input Voltage 208 - 230 VAC (+/- 10%), 50/60 Hz, Single Phase
DC Input Voltage 24 VDC @ 10 Amps
Weight 2,195 lbs (996 kg)
Envelope Dimensions 42.6 L x 43.2 W x 32.8 H (inches)
1.08 L x 1.10 W x 0.83 H (meters)
Noise Output 68-73 dBC at 1 meter
Sea Water Supply to Gyro Heat Exchanger 30 LPM (8 GPM) maximum
15 LPM (4 GPM) minimum
Ambient Air Temperature 0°-60° C (32°-140° F)

How to Buy

If you are buying a new boat, please consult directly with the builder. If you already own a boat and are interested in a refit, please contact Seakeeper directly or consult with one of our Global Partners.

Distrbutor IconCreated with Sketch. Installation Center IconCreated with Sketch. Seakeeper IconCreated with Sketch. Service Center IconCreated with Sketch. Service Installation ComboCreated with Sketch. angle-right3Asset 1boat-40-49boat-45-54boat-50-59boat-55-64boat-60-69boat-65-74 boat-70-84Asset 1boat-85+ Calendar IconCombined ShapeFacebookfacebook earthgoogle-plusinstagram linkedin Logo/Logomarkmail IconPhone IconAward IconLogo/SHD WhiteCreated with Sketch. Seakeeper LogomarkSmile IconInstallation IconTwittertwittervimeo youtube
View The
Seakeeper Brochure
Recreational
Commercial (HD)